Skip to main content

TowPay | Setting Up Your Stripe Reader T600

Set up the Stripe Reader T600 desktop card reader for TowPay: power, WiFi or Ethernet (Reader Hub), registration in the Stripe Dashboard, settings, updates, and troubleshooting.

J
Written by Jonathan Roberts

The Stripe Reader T600 is a smart card reader for TowPay customers who take payments at a counter or impound lot window from a desktop TMS. It has an 8" touchscreen, accepts tap, chip, and swipe, and connects to Stripe over WiFi or Ethernet. This article covers setup, registration, settings, and troubleshooting.

Stripe Reader T600 set up for countertop use
Stripe Reader T600 set up for pole-mount use

Before you start

  • This guide is for customers using TowPay. TowPay is currently supported with Dispatch Anywhere, TOPS, and TraxeroGO.

  • The T600 is a desktop reader. It works with your desktop TMS, not the iOS or Android apps.

  • You need a login to your Stripe Dashboard.

  • You need a location set up in the Stripe Dashboard under Terminal locations. Every reader must belong to a location.

  • Check that your network meets Stripe's network requirements.

Step 1: Power on the reader

  1. Plug the USB-C cable into the reader.

  2. Connect the cable to the included 20W power adapter or to your computer. A computer's USB-C port must supply at least 20W. Do not use a USB-A port.

  3. The reader starts up automatically as soon as it has power.

USB-C power port on the Stripe Reader T600

  • Turn the screen on or off: Press the power button on the back of the reader.

  • Restart: Hold the power button for 1 second.

  • Power off: Unplug the USB-C cable. The T600 has no battery.

Power button on the back of the Stripe Reader T600

Step 2: Open the settings menu

  1. Swipe right from the left edge of the reader screen.

  2. Tap Settings.

  3. Enter the admin passcode 07139 to open Admin options.

From Admin options you can change network settings, generate a pairing code, change the language, adjust the display, and run diagnostics. Tap Back in the top left corner to close the menu.

Settings button in the reader side menu

Admin passcode entry screen

Admin options menu

Step 3: Connect the reader to the internet

The T600 connects to Stripe directly over the internet. Use WiFi, or use Ethernet with the optional Reader Hub.

Connect to WiFi

  1. Open the settings menu (Step 2).

  2. Select Wi-Fi settings.

  3. Choose your network and connect.

Joining a new network disconnects the reader from its current wireless network.

Connect to Ethernet with the Reader Hub (optional)

The Reader Hub adds a 10/100 Ethernet port and two USB-A ports for accessories like a barcode scanner or receipt printer.

  1. Connect an Ethernet cable from the hub to your router.

  2. Connect the hub to power using its built-in USB-C cable. Use the power adapter that came with your T600 so there is enough power for the reader and any accessories.

  3. Once both cables are in place, connect the hub to the reader.

Reader Hub connected to Stripe Reader T600, front view

Reader Hub connected to Stripe Reader T600, back view

When Ethernet is working, an Ethernet icon shows in the status bar. The reader gets an IP address automatically (DHCP) and connects to Stripe as soon as the cable is plugged in.

Which connection does the reader use?

  • Hub attached with a live Ethernet cable: the reader uses Ethernet, even if WiFi is set up.

  • Hub attached with no Ethernet cable: the reader stays on WiFi.

  • Hub removed: the reader goes back to WiFi.

Step 4: Register the reader

Register the T600 to your Stripe account and assign it to a location. Use either a pairing code or the serial number.

Option A: Register by pairing code

  1. Power on the reader and connect it to WiFi or Ethernet.

  2. On the reader, swipe right from the left edge of the screen and tap Settings.

  3. Enter the admin passcode 07139.

  4. Tap Generate pairing code.

  5. In the Stripe Dashboard, go to the Readers page and click Register reader.

  6. Enter the pairing code and click Next.

  7. Name the reader, choose a location, and click Register.

Option B: Register by serial number

  1. In the Stripe Dashboard, go to the Readers page and click Register reader.

  2. Enter the serial number. It's printed on the back of the reader and begins with STT60. To register several readers at once, separate the serial numbers with commas.

  3. Name the reader, choose a location, and click Register.

Display, theme, and language

  • Display timeout: In settings, select Appearance, then choose from the Display timeout dropdown: 15 minutes, 1 hour, 6 hours, 12 hours, or never. The screen wakes when someone touches it or a payment starts.

  • Brightness: In settings, select Appearance and adjust Brightness.

  • Light or dark theme: In settings, select Appearance and pick a theme from the dropdown.

  • Language: In settings, select Language.

Reader payment screen

Reader processing screen

Reader approved screen

What the beeps mean

  • Tap, success: One long, high-pitched beep.

  • Tap, failure: Two short, low-pitched beeps.

  • Chip, success or failure: No sound. Check the screen for the result.

  • Swipe, failure: Two short beeps.

Software updates

Stripe maintains the reader software and pushes updates automatically when the reader isn't in use. Updates include improvements and required security fixes. A reader that misses a required update may stop accepting payments.

  • Leave the reader plugged in overnight. The reader restarts every day at midnight, in the time zone of its assigned location, and installs updates then so sales aren't interrupted.

  • The reader also disconnects from the POS each morning after the restart.

  • If you unplug the reader at night, an update may start when you power it back on.

  • To check for an update manually, restart the reader.

  • To see your reader's current software version, open settings and select Diagnostics.

Troubleshooting

Run diagnostics

  1. Swipe in from the left edge of the reader screen.

  2. Tap Settings.

  3. Enter the admin passcode 07139.

  4. Select Diagnostics.

Diagnostics checks:

  • DNS resolution: Whether the reader can look up domain names.

  • Stripe connectivity: Whether the reader can reach Stripe. This must pass to take payments and get updates.

  • Terminal events connectivity: The reader's connection to Stripe's event service.

  • Wi-Fi information: WiFi frequency and signal strength.

  • Hardware status: Hardware health and Reader Hub connection.

If the Stripe connectivity test fails, the reader can't take payments or install updates. Follow Stripe's network troubleshooting steps.

The reader won't turn on

The T600 has no battery and needs 20W of power through USB-C. Use the AC adapter that came with the reader. If you power it from a computer, the computer's USB-C port must supply 20W. A USB-A port can't provide enough power.

The reader can't connect to the internet

In settings, select Network to see available WiFi networks. Tap the connected network for details. For signal strength, select Advanced > Diagnostics. Then run the diagnostics tests above.

The reader won't update

This usually means the reader can't reach Stripe. Run diagnostics and confirm Stripe connectivity shows Passed. If you use a router, check its manual and review your network setup.

Specifications

  • Dimensions: Face 8.1 x 5.47 in (205 x 139 mm). Depth 0.98 in (25 mm) bare or VESA mount, 2.25 in (57 mm) with base.

  • Weight: About 1.1 lb (500 g).

  • Display: 8.0" IPS LCD, Dragontrail glass, 1280 x 800, 500 nit.

  • Power: USB-C, 20W recommended. No battery.

  • Memory and storage: 4GB RAM, 64GB storage.

  • Processor: Qualcomm SM6125.

  • Connectivity: WiFi. Ethernet with the optional Reader Hub.

  • Operating system: Android 15.

  • Camera: 5MP front-facing (future support).

  • Audio jack: Supported.

  • Security: End-to-end encryption, P2PE ready, PCI 6.x.

  • Accessories: Reader Hub, T-bridge, third-party VESA stand.

What happens next

Once the reader is registered and shows as online on the Stripe Dashboard Readers page, it's ready to take payments from your desktop TMS. Leave it plugged in so it can receive updates overnight.

Frequently asked questions

What is the admin passcode for the T600?

The default admin passcode is 07139.

Can I use the T600 with the driver app on my phone or tablet?

No. The T600 is a desktop reader for your desktop TMS. For the iOS or Android app, use the Stripe Reader M2 (US) or BBPOS WisePad 3 (Canada).

Does the T600 have a battery?

No. It must stay plugged into a 20W USB-C power source to run.

Why won't my T600 turn on?

It isn't getting enough power. Use the included 20W adapter, or a computer USB-C port that supplies 20W. USB-A ports don't work.

How do I connect the T600 to Ethernet?

Use the optional Reader Hub. Connect Ethernet from the hub to your router, power the hub with the T600's adapter, then attach the hub to the reader.

Where do I find the T600 serial number?

On the back of the reader. It begins with STT60.

How do I register my T600 to my account?

In the Stripe Dashboard, go to Readers and click Register reader. Enter either a pairing code generated on the reader or the serial number, then name the reader and choose a location.

Why did my reader restart overnight?

The T600 restarts every day at midnight in its location's time zone and installs any updates then. This is expected.

Why did my reader disconnect from the POS this morning?

The reader disconnects from the POS each morning after its daily restart. This is expected.

My reader stopped taking payments. What should I check?

Run diagnostics and confirm Stripe connectivity passes. A reader that can't reach Stripe, or that has missed a required update, may stop accepting payments.

Why doesn't the reader beep when I insert a chip card?

Chip transactions don't make a sound for success or failure. Check the screen for the result.

Did this answer your question?